Additional Setup; Modifying User Accounts And Default Password - HP Integrity rx6600 User's & Service Manual

2. Log in using the default the iLO 2 MP user name and password (Admin/Admin).
TIP: For security reasons, HP strongly recommends you modify the default settings during
the initial login session. See
The following items are available from the MP Main Menu:
iLO MP MAIN MENU:
CO:
VFP:
CM:
CL:
SL:
SMCLP:
HE:
See the HP Integrity iLO 2 Operations Guide for information on the iLO 2 MP menus and commands.
When logging in using the local or remote RS-232 serial ports, the login prompt may not display
if another user is logged in through these ports. To access the MP Main Menu and the iLO 2 MP
prompt (MP>), press Ctrl-B.

Additional Setup

This section provides additional information to setup the iLO 2 MP.

Modifying User Accounts and Default Password

The iLO 2 MP comes preconfigured with default factory settings, including a default user account
and password. The two default user accounts on initial login are:
All Rights (Administrator) level user:
login = Admin
password = Admin
Console Rights (Operator) level user:
login = Oper
password = Oper
IMPORTANT:
TIP: For security reasons, HP strongly recommends you modify the default settings during the
initial login session.
Make the following changes using any of the iLO 2 MP user interfaces.
To modify default account configuration settings, follow these steps:
1. Log in as the administrator. You must log in as the administrator in order to modify default
user configuration settings
2. To modify default passwords:
a. Access the MP Main Menu.
b. Enter CM at the MP> prompt.
c. Enter UC at the MP:CM> prompt and follow the prompts to modify default passwords.
"Modifying User Accounts and Default Password" (page
Console
Virtual Front Panel
Command Menu
Console Logs
Show Event Logs
Server Management Command Line Protocol
Main Menu Help
X: Exit Connection
Login and password are case sensitive.
85).
Console Setup 85