2.2.4.
Process Unit
Ver. 1.2
(7) While holding each side of the Bracket against the
notch, secure the Rear Lamp Belt Lock (228) and
the Front Lamp Belt Lock (227) with 2 Red Screws
(D24).
(8) Clean the Mirror 1 (264), the Mirror 2 (265), and the
Multi Beam Sensor.
Note:
1. Do not touch the surface of the Sensors with your
hands.
2. Clean any dirt or fingerprints with a Dry Cotton
Swab.
3. Do not use Isopropyl Alcohol / any Alcohol.
(1) Open the Right Cover (1201).
(2) Open the Front Cover (528).
(3) Remove the Toner Waste Container (618).
(4) Remove the Toner Bottle (617).
(5) Remove 1 Screw (19).
(6) Remove the Connector Cover (Clear Blue) (538).
Caution:
When reconnect the Harness, make sure the
connector position and its keys. Insert it gently, and do
not force the connector if it is facing the wrong way.
Caution:
When reinstalling the Connector Cover, make sure
the Harness is not nipped by the Cover.
55
DP-8032/8025
2008