Panasonic DP-8032 Service Manual page 375

Network Firmware Update Tool (LAN)
Enter the device location on the network by using
4.
either Manual Input or Device Address List
methods.
Manual Input Tab
Device Name: Type the name of the device you
are updating (i.e. DP-3010)
IP Address: Type the IP Address of the device
you are updating (this information can generally
be located through the Key Operator or Service
Modes)
Password: Enter the device password
Note: If the default password is used on the
device there is no need to enter it in this box
When compete select the [ >> ] button to add the
destination to the list.
Device Address List Tab
Locate and select the device you would like to
update on the Device Address List.
Select the [ >> ] button to add the destination to
the list.
Note: Multiple destinations can be added to
update more than one device.
Click [OK].
Confirm the device information and
5.
destination(s).
Click [Next>].
Page 8