Panasonic DP-8032 Service Manual page 321

Ver. 1.2
(61) Connect the HT4 Harness to the RLB PC Board
(CN172).
(62) Connect the HT3 Harness to the HT4 Harness.
(63) Connect the HT1 Harness to the HT3 Harness.
(64) Connect the PTC-AC Harness 3 to the HT1 Harness.
(65) Reinstall the HP Cover.
Note:
When reinstalling, ensure that the Harnesses do not
get damaged.
(66) Insert the HT4 Harness to the Harness Clamp.
(67) Insert the HT1 Harness to the Harness Clamp.
(68) Insert the PTC-AC Harness 3 to the Harness Clamp.
(69) Cut off the Protective Tab on Lower Rear Cover.
(70) Attach the Heater Label.
(71) Reinstall all Covers.
(72) Attach the Power Label.
321
DP-8032/8025
2008