Panasonic DP-8032 Service Manual page 346

(8) This header must be deleted before the email is sent to your machine for reprogramming of Internet
Parameters.The information following the "#" sign is ignored by your machine, therefore, you can leave
it as is, or delete it if you wish.
(1) To
From
Subject
(2) @begin to @end
Ver.1.2
(b) Community Name(2) (32-characters maximum).
The syntax is:com_name2;<Community Name(2)>
(c) Device Name (32-characters maximum).
The syntax is:device;<Device Name>
(d) Device Location (32-characters maximum).
The syntax is:location;<Device Location>
Your Machine's Address Book (Auto Dialler) Email Sample
From: "Your Machine" <ifax2@panasonic.com>
Subject: Your Machine's SYSTEM PARAMETER List
To: user1@panasonic.com
[Delete this header before sending the email.]
#---------------------------------------------
# Your Machine's ADDRESS BOOK List
#
# STATION : PANASONIC
# EMAIL : ifax2@panasonic.com
# DATE/TIME : dd-MMM-yyyy 17:45
#---------------------------------------------
(a) (b)
(c)
@begin
000;SALES DEPT;SALES DEPT;ifaxlink@ifax.panasonic.com;1111;5551234;
001;SP-200;SP-200;#0003;;;
002;SP-200IFAX;SP-200IFAX;ifax@panasonic.com;;;
003;LONDON;LONDON;ifax-rly@london.panasonic.co.uk;;;
004;ROME;ROME;#396111234;;;
(a) (b) (c)
@end
@program P01 "POP3" POP
(d)
user;POP3
(e)
password;"pop-pswd"
(f)
delete;on
@end (h)
(g)
@program P02 "Group1;Group1" GROUP
(j)
001-002
@end
: Your machine's email address.
: This field is normally not visible when creating new email message(s).It is
your default email address (email application), for retrieving the Auto
Dialler (Address Book Dialling) data, and for error message notification.
(Can be programmed with the configuration tool of your email program.)
: To Store data, type: #set abbr(password)#
: Defines the Auto Dialler (Address Book Dialling) to be set in section (2)
between @begin to @end block.
Edit, Delete, or Register the information.Separate each data field with a
semicolon (;). (If the remaining fields are to remain blank, insert a
semicolon (;) for each blank field)
The data string for each station should be defined within a single line.
The syntax is: <Entry-number>;<Station-name>;<Key-name>;<Station-
address>;<Routing-subaddress>;<Routing-id-number>
(a) Entry-number: Address Book entries 000 to 199 (200 stations
(1)
(d) (e) (f)
(g)
(3)
(i)
346
(4)
(2)
DP-8032/8025
2008