Panasonic DP-8032 Service Manual page 155

Code Function
E7- 27 Finisher Tray Shift Motor
E7- 59 Finisher Upper Limit
E7- 90 Hardware Key Abnormal
E7- 91 Data Security Kit Abnormal
Note:
These error codes will appear only when the optional accessories are installed. Refer to the appropriate
Optional Unit Service Manual.
Code Function
E13 No Toner Detection
Technician Warning:
The following message will be displayed in the event that the required Additional Sort Memory to operate
the HDD is not installed.
LCD Message
HDD Option Requires Additional Sort
Memory Minimum 16 MB
Ver. 1.2
E7: Optional Unit Error (DA-FS300)
1. Motor Connector disconnected.
2. Motor defective.
3. Paper Height Sensor Connector disconnected.
4. Paper Height Sensor defective.
5. Gear defective.
1. Paper Upper Limit Sensor Connector disconnected.
2. Paper Upper Limit Sensor defective.
3. Paper Hold Sensor Connector disconnected.
4. Paper Hold Sensor defective.
1. Incorrect Hardware Key installed.
2. Hardware Key defective.
Hardware Key for Data Security Kit is not installed.
E13: Out of Toner
1. Out of Toner.
2. Toner Bottle not installed.
3. Toner Bottle not installed correctly.
4. Toner Sensor disconnected.
5. Toner Sensor defective.
6. SPC PCB connector disconnected.
7. SPC PCB defective.
1. Additional Sort memory is not installed.
• DA-SM16 (16 MB)
• DA-SM64 (64 MB)
• DA-SM28 (128 MB)
2. Make sure the SDRM PC Board was installed properly.
155
Possible Cause(s)
Possible Cause(s)
Possible Cause(s)
DP-8032/8025
2008