Ver.1.2
(3) Remove 4 Screws.
(4) Remove the Right Rear Cover and the Rear Right
Cover.
(5) Cut the Protective Tab on the Right Rear Cover.
(6) Connect the KEY Harness into the KC Harness.
(7) Connect the KEY Harness to CN726 on the SPC PC
Board.
(8) Insert the KC Harness through the Access hole of the
RR Frame.
(9) Secure the KEY Harness with 3 Harness Clamps.
(10) Reinstall the Right Rear Cover and the Rear Right
Cover, and close the Rear Cover.
(11) Route the Key Counter Socket Harness through the
KC Bracket.
312
DP-8032/8025
2008