Ver. 1.2
(48) Remove 2 Screws (2736).
(49) Loosen 1 Screw.
(50) Remove the Staple Unit (2938).
<Removing the Finisher Interface Cable>
(51) Remove 2 Screws (2633).
(52) Release the Harness from the Harness Clamps.
(53) Disconnect 2 Harnesses and remove the Finisher
Interface Cable.
<Removing the Motors>
(54) Disconnect the Harness.
(55) Remove 2 Screws (3030).
(56) Remove the Sensor Hold Bracket (3008).
(57) Remove 2 Screws (2633).
(58) Remove the Drive Motor (3014).
361
DP-8032/8025
2008