Panasonic DP-8032 Service Manual page 347

(3) @program to @end
(4) This header must be deleted before the email is sent to your machine for reprogramming of Auto
Dialler (Address Book Dialling).
The information following the "#" sign is ignored by your machine, therefore, you can leave it as is, or
delete it if you wish.
Note:
1. If a POP user account is programmed into the P1 to P12 program keys, the data programmed for
this key cannot be deleted, even when the delete command is specified.
2. The email address, and the telephone number cannot be programmed via email when:
- Address Book (Auto Dialler) Number has been used for communication reservation.
- Received documents are stored in the image data memory of the machine.
- While the machine is communicating, or printing.
3. When the email address, and telephone number are programmed via email, a program result email
is sent back.
4. Some email applications automatically insert a line feed in the middle of a line when the number of
characters in a line exceed a specific number. Turn "Off" the automatic line feed, or define the
number of characters per line to prevent a line feed, or the data will be ignored.
9.1.6. Deleting the Entire Auto Dialler
If you wish to delete the entire Auto Dialler data in your machine, type the following command in the body of
the email message:
Ver. 1.2
maximum)
(b) Station-name: Name of the station being programmed (15 alpha-
numeric characters maximum)
(c) Key-name: Name of the key being programmed (15 alpha-numeric
characters maximum)
(d) Station-address: email address, or telephone number of the station
being programmed
(e) Routing-subaddress: sub-address to be used for routing (20-digit
maximum)
(f) Routing-id-number: TSI to be used for routing (20-digit maximum)
(g) The End Receiving Station.s telephone number is entered after the
hash sign (#).
: Defines the Program Keys stored as a Group Key, or POP Access Key to
be set in section (3) between @program to @end block.
Edit, Delete, or Register the information.
(a) Program Key: P01 - P12
(b) Key-name: Name of the Program key being programmed (15 alpha-
numeric characters maximum)
(c) POP: The syntax used to set the Program Key as a POP Access Key.
(d) POP User-name: Name of the POP user account (40 alpha-numeric
characters maximum)
(e) POP Password: POP Password (30 alpha-numeric characters
maximum)
(f) Set whether the emails on the POP Server are deleted after retrieving
the emails.
(g) Station-name as a Group Key: Name of the station being programmed
(15 alpha-numeric characters maximum)
(h) Key-name: Group key name (15 alpha-numeric characters maximum)
(i) GROUP: The syntax used to set the Program Key as a Group Key
(j) ntry-number: Address Book entries 000 to 199 (200 stations
maximum)
347
DP-8032/8025
2008