Panasonic DP-8032 Service Manual page 302

8.16. Installing the Exit Tray [Outer] (DA-XT200)
8.16.1. Contents
Visually check the condition and contents of the box for completeness, or for any shipping damage before
starting with the installation.
Remove all Tapes, and the packing materials used to secure the Units during shipment.
After unpacking the product, dispose of the packing materials appropriately.
No. Qty.
1 1
2 1
3 4
4 1
Note:
Refer to the Parts Manual for Part Number(s), Packing, and Accessories in details.
8.16.2. Installation
Caution:
The DP-8032 series has been described as an example of the representative.
Refer to each service manual for other models.
CAUTION!
Turn the Power Switch on the Left Side and the Main Power Switch on the Back of the machine
to the OFF position, and then unplug the AC Power Cord before beginning installation.
<<Before Installing this Option. Perform this step first to avoid overlooking it later>>
Set the Service Parameter to activate the Tray by following the steps below.
1. Press the "FUNCTION", "ORIGINAL SIZE (LEDGER/A3)", and the "3" keys simultaneously.
2. Input the password, and select the "OK" button to enter the Service Mode (default password is
00000000).
3. Press the "5" key, and press the "START" key to enter the F5 Service Mode.
4. Select "37 Output Tray (Outer)".
5. Select the "Yes" button.
6. Select the "OK" button twice.
7. Press the "FUNCTION", and the "C (Clear)" keys simultaneously to exit the Service Mode.
8. Reboot the machine after setting the parameter(s) to activate the setting(s). (Turn the Power Switch on
the Left Side of the machine to the OFF then back to the ON position.)
Ver.1.2
Description
Outer Cover Assembly
Exit Tray Assembly
Screw (M3 x 10)
Installation Instructions
1
This document
2
302
DP-8032/8025
Remarks
3 4
2008