Panasonic DP-8032 Service Manual page 50

Ver. 1.2
<Removing the Scanner Motor>
(27) Remove 4 Silver Screws (S6).
(28) Open the Rear Cover.
(29) Remove 4 Silver Screws (S6).
(30) Remove the Rear Right Cover (507) and the Right
Rear Cover (518).
(31) Remove the E-Ring (5Y).
(32) Remove the Synchro Belt (208).
(33) Remove the MXL34 Pulley (217).
(34) Remove 1 Screw (6P).
(35) Remove the Fan (459).
(36) Disconnect the Harness on the Scanning Motor.
(37) Remove 3 Screws (19).
(38) Remove the Motor Bracket (249) Assembly.
Note:
When reinstalling the Motor Bracket, tighten the upper
screw first.
50
DP-8032/8025
2008