Panasonic DP-8032 Service Manual page 345

(2) @sender to @end
(3) @select-domain to @end : Defines the Selectable Domains to be set in section (3) between
(4) @relay-domain to @end
(5) @system to @end
(6) @ldap to@end
(7) @mib to @end
Ver. 1.2
: Defines the Sender information to be set in section (2) between @sender
to @end block. Edit, Delete, or Register up to 24 User Names, and their
Email Addresses for the Sender Selection feature.
(See Operating Instructions for Facsimile and Internet Fax/Email
Functions.)
Separate each data field with a semicolon (;). (If the remaining fields are
to remain blank, insert a semicolon (;) for each blank field)
The data string for each Sender Selection should be defined within a
single line.
The syntax is: <Sender Selection Number>;<User Name>;<Email
Address>
(a) 01 to 24: Indicates the Sender Selection Numbers
(b) User Name (25-characters maximum)
(c) Email Address (60-characters maximum)
@select-domain to @end block. Register up to 10 alternate Domain
Names that can be selected during manual email addressing. (30-
characters maximum)
The syntax is: <Number>;<Domain>
: Defines the Domain Names to be set in section (4) between @relay-
domain to @end block. Register up to 10 Domain Names that have been
authorized to access your Internet Fax for Relayed XMT Request. (30-
characters maximum)
: Defines the Internet Parameters to be set in section (5) between
@system to @end block. Register the following Internet Parameters.
(a) Default Domain (50-characters maximum).
The syntax is:domain;<Default domain name>
(b) Manager.s Email Address (60-characters maximum).
The syntax is:manager;<Manager.s Email Address>
(c) Relay XMT Password (10-characters maximum).
The syntax is:relay;"<Relay XMT Password>". Quotation marks " "
enclosing the password, is required, as shown in the example above.
(d) Remote Password (10-characters maximum).
The syntax is:remote;"<Remote Password>". Quotation marks " "
enclosing the password, is required, as shown in the example above.
(Notice that for the above example, we have changed the Manager's
Email Address, Relay XMT Password, and the Remote Password)
: Defines the LDAP Parameters to be set in section (6) between @ldap to
@end block. Register the following Internet Parameters.
(a) LDAP Server Name (60-characters maximum).
The syntax is:server;<LDAP Server Name>
(b) LDAP Login Name (60-characters maximum).
The syntax is:login;<LDAP Login Name>
(c) LDAP Password (30-characters maximum).
The syntax is:password;"<LDAP Password>". Quotation marks " "
enclosing the password, is required, as shown in the example above.
(d) LDAP Search Base (40-characters maximum).
The syntax is:base;<LDAP Search Base>
: Defines the MIB to be set in section (7) between @mib to @end block.
Register the following Internet Parameters.
(a) Community Name(1) (32-characters maximum).
The syntax is:com_name1;<Community Name(1)>
345
DP-8032/8025
2008