Replacing The Opc Drum - Panasonic DP-8032 Service Manual

8.22. Replacing the OPC Drum

Ver.1.2
(1) Open the Right Cover.
(2) Open the Front Cover.
(3) Remove the Toner Waste Container.
(4) Remove 1 Screw.
(5) Remove the Connector Cover (Clear Blue).
(6) Disconnect the Harness.
(7) Loosen 1 Screw.
(8) Slide the Process Unit out.
Caution:
To prevent damage to the Process Unit, ensure the
Right Cover is still open before pulling the Process
Unit out.
Caution:
Exercise caution not to scratch the surface of the
OPC Drum (Green), and not to touch it with bare
hands.
334
DP-8032/8025
2008