Scanner Unit - Panasonic UF-9000 Service Manual

2.2.3.

Scanner Unit

2.2.3.1. Scanning Lamp (303), SPC PC Board (1910)
Ver. 1.0
(1) Remove the ADF Rear Cover. (Refer to 2.2.1.3.)
(2) Remove 1 Screw (V9).
(3) Disconnect the Harness on the ADF PC Board
(PA04).
(4) Open the ADF.
(5) Release the Latch of the Left Hinge with a small
Straight Edge Screwdriver and remove the ADF.
(6) Remove the Control Panel Unit.
(Refer to 2.2.2.1.)
(7) Remove 8 Screws (V7).
(8) Remove the Wire Clamp.
(9) Remove the Scanner Cover Assembly (219).
(10) Disconnect the Harness.
(11) Remove 2 Screws (W8).
(12) Remove the Scanning Lamp (303).
(13) Slide the CCD Unit.
49
UF-9000
DP-180/190
JAN 2004