Panasonic DP-8032 Service Manual page 239

< Paper Feed Module Recording Paper Size Setting >
Lift DC Motor (1152)
a. The Recording Paper size in the Paper Feed Module is set on the Touch Panel.
2. Sheet Bypass
< NP Sensor Operation >
a. The NP Actuator attached to the Paper Feed Unit determines if there is paper in the paper tray.
b. The paper in the paper tray lowers the NP Actuator and the NP Sensor (1045) actuates.
< Sheet Bypass Operation >
Reverse Roller (1291)
a. When the printing operation begins, the PRINT (Print Request Signal) turns On and the Main Motor
(907) starts driving the Gears.
b. The Clutch (1105) is energized for a specified period of time and turns ON. This activates the Feed
Roller (1244). The paper is raised by the Pressure Plate (1295) and is transported to the Reverse
Roller (1291). The paper is separated into individual sheets by the Reverse Roller (1291).
Ver. 1.2
Coupling (1171)
NP Sensor (1045)
239
NP Sensor (1045)
Paper Feed Roller (1244)
NP Actuator (1299)
DP-8032/8025
Pressure Plate (1295)
2008