Panasonic DP-8032 Service Manual page 271

Using the Network Address Book Editor to Copy and Paste the Address Book Data
1. An appropriate Address Book Editor module is automatically selected depending on which style of Fax
Address Book is activated on the DP-8032/8025. Retrieve the 200 Station, Fax Address Book data
from the unit as follows:
a) Click on START\Programs\Panasonic\Panasonic Document Management System and select
Device Explorer.
b) The Device Explorer screen is displayed, select your desired device.
c) Click on Device and select Open Network Address book Editor in the drop down menu.
d) In the menu bar, click on Tools and in the drop down menu on Address Book Editor.
e) The Network Address Book Editor "DP-8032/8025" screen appears, under the Address Book Editor
directory, click on Fax Address Book.
f) When the 200 station Fax Address Book file is displayed, save the data file by clicking on File\Save
As... and type the file name of your choice (i.e. 200 Station).
g) Then click the OK button.
2. Change the Address Book of the unit from 200 to 1,000 Stations, using the Service Mode described
previous page.
3. Retrieve the 1,000 Fax Address Book (empty) data again from the unit using the same method as
above. When the Address Book Editor appears this time, it will show "DP-8032/8025 (Fax1000)".
Save the data file as above, except change to another name (i.e. 1,000 Station).
4. Open the 200 Fax data file of step 1. and the 1,000 Fax data file of step 3.. Copy the 200 Fax data and
paste it into the 1,000 Fax data file, add additional desired names to the file, then save it again. (Refer
to Help.)
5. Transfer the edited 1,000 Fax data file to the unit, by clicking on Transfer and Write in the menu bar.
Close the Network Address Book Editor application after the transfer is successfully completed.
Ver. 1.2
271
DP-8032/8025
2008