Panasonic DP-8032 Service Manual page 191

No. Item
48 Not Used
49 T Mode Image Density
50 T/P Mode Image Density
51 P Mode Image Density
52 Not Used
53 CCD Read Position Adj
54 T Mode Contrast
55 T/P Mode Contrast
56 P Mode Contrast
57 Charge Roller Frequency
58 Charge Roller Current
59 Trail Edge Trans Trays
60 Trail Edge Trans Bypass
61 Trail Edge Trans 2Sided
62 TDC Gain Voltage Adjust
63 Lead Edge Read Timing
64 Side Edge Read Adjust
65 Black Density Reference
66 Black Density Output
67 ADF Image Density
68 Paper Loop (Tray 3)
69 Stamp Position Adjust
70 Not Used
71 ADF Main Scan Pos. 2S
72 Orig. Lead Edge ADF 2S
73 Orig. Trail Edge ADF 2S
74-77 Not Used
78 Paper Loop (Tray 4)
79 MTF Adjust
Ver. 1.2
F6 Mode
Remarks
Image density adjustment for Text mode.
(-) : Darker.
(+) : Lighter.
Image density adjustment for Text/ Photo mode.
(-) : Darker.
(+) : Lighter.
Image density adjustment for Photo mode.
(-) : Darker.
(+) : Lighter.
Adjustment of CCD read position.
Adjustment of Contrast for Text Mode.
Adjustment of Contrast for Text/Photo Mode.
Adjustment of Contrast for Photo Mode.
Adjustment of Charge Roller Frequency.
Adjustment of Charge Roller Current.
Trail Edge Transfer Image High Voltage Timing
Adjustment for Trays 1-4 feeding.
Trail Edge Transfer Image High Voltage Timing
Adjustment for Bypass Tray feeding.
Trail Edge Transfer Image High Voltage Timing
Adjustment for the 2nd side of 2-Sided printing.
Adjustment of Toner Density sensor gain voltage.
Adjustment of Lead Edge Read Point.
Adjustment of Side Edge Read Point.
Reference voltage for Black Density sensor.
Compensate value for Black Density sensor output. -127 ~ +127
Compensation of ADF image density.
Individual Fine Adjustment for Tray 3
Adjustment of verification stamp position.
Adjustment of ADF horizontal image read start
position for 2-sided.
Adjustment of original detection timing for 2-sided.
Adjustment of trail edge detection timing for 2-
sided.
Individual Fine Adjustment for Tray 4
Adjustment of Scanning Sharpness by digital image
processing for Text /Photo Copy Mode.
191
DP-8032/8025
Setting
Range
-99 ~ +99
-99 ~ +99
-99 ~ +99
-42 ~ +44
0.2 mm
-128 ~ +127
-128 ~ +127
-128 ~ +127
-56 ~ +25
-58 ~ 0
5 µA
-30 ~ +30
0.5 mm
-30 ~ +30
0.5 mm
-30 ~ +30
0.5 mm
-10 ~ +10
0.033V
0 ~ +9
0.5 mm
0 ~ +9
0.5 mm
-127 ~ +127
-99 ~ +99
-99 ~ +99
0.176 mm
-50 ~ +50
0.3 mm
-99 ~ +99
0.05 mm
-99 ~ +99
0.3 mm
-127 ~ +127
0.3 mm
-99 ~ +99
0.176 mm
-2 ~ +2
2008