Cluster Management Configuration Example; Network Requirements - HP 5500 EI Series Configuration Manual

Task
Display information about the
cluster to which the current
switch belongs.
Display the standard
topology.
Display the current blacklist of
the cluster.
Display information about
candidate switches.
Display the current topology.
Display information about
cluster members.
Clear NDP statistics.

Cluster management configuration example

Network requirements

Three switches form cluster abc, whose management VLAN is VLAN 10. In the cluster, Switch B
•
serves as the management switch (Administrator), whose network management interface is
VLAN-interface 2; Switch A and Switch C are the member switches (Member).
All the switches in the cluster use the same FTP server and TFTP server on host 63.172.55.1/24, and
•
use the same SNMP NMS and log services on host IP address: 69.172.55.4/24.
Add the switch whose MAC address is 000f-e201-0013 to the blacklist.
•
Command
display cluster [ | { begin | exclude |
include } regular-expression ]
display cluster base-topology [ mac-address
mac-address | member-id member-number ]
[ | { begin | exclude | include }
regular-expression ]
display cluster black-list [ | { begin | exclude
| include } regular-expression ]
display cluster candidates [ mac-address
mac-address | verbose ] [ | { begin | exclude
| include } regular-expression ]
display cluster current-topology
[ mac-address mac-address [ to-mac-address
mac-address ] | member-id member-number
[ to-member-id member-number ] ] [ | { begin
| exclude | include } regular-expression ]
display cluster members [ member-number |
verbose ] [ | { begin | exclude | include }
regular-expression ]
reset ndp statistics [ interface interface-list ]
194
Remarks
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in any view.
Available in user view.