Configuring The Snmp Configuration Synchronization Function - HP 5500 EI Series Configuration Manual

network management interface for communicating with these devices. Otherwise, communication failure
will occur.
To configure the interaction for a cluster:
Step
1. Enter system view.
2. Enter cluster view.
3. Configure the FTP server
shared by the cluster.
4. Configure the TFTP server
shared by the cluster.
5. Configure the log host shared
by the member switches in the
cluster.
6. Configure the SNMP NM host
shared by the cluster.
7. Configure the NM interface of
the management switch.

Configuring the SNMP configuration synchronization function

SNMP configuration synchronization simplifies SNMP configuration in a cluster by enabling the
management switch to propagate its SNMP settings to all member switches on a whitelist. These SNMP
settings are retained on the member switches after they are removed from the whitelist or the cluster is
dismissed.
To configure the SNMP configuration synchronization function:
Step
1. Enter system view.
2. Enter cluster view.
3. Configure the SNMP
community name shared by a
cluster.
4. Configure the SNMPv3 group
shared by a cluster.
5. Create or update information
about the MIB view shared by
a cluster.
Command
system-view
cluster
ftp-server ip-address [ user-name
username password { simple |
cipher } password ]
tftp-server ip-address
logging-host ip-address
snmp-host ip-address
[ community-string read string1
write string2 ]
nm-interface vlan-interface
interface-name
Command
system-view
cluster
cluster-snmp-agent community
{ read | write } community-name
[ mib-view view-name ]
cluster-snmp-agent group v3
group-name [ authentication |
privacy ] [ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ]
cluster-snmp-agent mib-view
included view-name oid-tree
192
Remarks
N/A
N/A
By default, no FTP server is
configured for a cluster.
By default, no TFTP server is
configured for a cluster.
By default, no log host is
configured for a cluster.
By default, no SNMP host is
configured.
Optional.
Remarks
N/A
N/A
N/A
N/A
By default, the name of the MIB
view shared by a cluster is
ViewDefault and a cluster can
access the ISO subtree.