Managing The Security Log File - HP 5500 EI Series Configuration Manual

Step
2. Enable the information
center.
3. Enable the saving of the
security logs into the
security log file.
4. Set the interval for saving
security logs to the
security log file.
5. Set the maximum size of
the security log file.
6. Set the alarm threshold
of the security log file
usage.

Managing the security log file

After passing the AAA local authentication, the security log administrator can perform the following
operations:
Task
Display a summary of the
security log file.
Change the directory where
the security log file is saved.
Display contents of the
security log file buffer.
Save all the contents in the
security log file buffer into
the security log file.
Command
info-center enable
info-center security-logfile
enable
info-center security-logfile
frequency freq-sec
info-center security-logfile
size-quota size
info-center security-logfile
alarm-threshold usage
Command
display security-logfile summary [ | { begin |
exclude | include } regular-expression ]
info-center security-logfile switch-directory
dir-name
display security-logfile buffer [ | { begin |
exclude | include } regular-expression ]
security-logfile save
50
Remarks
Optional.
Enabled by default.
Disabled by default.
Optional.
The default saving interval is 600 seconds.
Optional.
The default value is 1 MB.
Optional.
The default setting is 80. When the usage of
the security log file reaches 80%, the system
will inform the user.
Remarks
Optional.
Optional.
By default, the directory to
save the security log file is the
seclog directory in the root
directory of the storage
medium.
Available in user view.
Optional.
Optional.
By default, the system
automatically saves the
security log file at a frequency
configured by the info-center
security-logfile frequency
command into a directory
configured by the info-center
security-logfile
switch-directory command.
Available in user view.