HP 5500 EI Series Configuration Manual page 75

Step
1. Enter system view.
2. Enable the SNMP
agent.
3. Configure system
information for the
SNMP agent.
4. Configure the local
engine ID.
5. Create or update a
MIB view.
Command
system-view
snmp-agent
snmp-agent sys-info { contact sys-contact |
location sys-location | version { all |{ v1 | v2c
| v3 }* } }
snmp-agent local-engineid engineid
snmp-agent mib-view { excluded | included }
view-name oid-tree [ mask mask-value ]
65
Remarks
N/A
Optional.
By default, the SNMP agent is
disabled.
You can also enable the SNMP
agent service by using any
command that begins with
snmp-agent except for the
snmp-agent
calculate-password and
snmp-agent ifmib long-ifindex
enable commands.
The defaults are as follows:
•
Contact—null.
•
Location—null.
•
Version—SNMPv3.
Optional.
The default local engine ID is
the company ID plus the device
ID.
Optional.
By default, the MIB view
ViewDefault is predefined and
its OID is 1.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB subtree masks
multiple times, the last
configuration takes effect.
Except the four subtrees in the
default MIB view, you can
create up to 16 unique MIB
view records.