Applying A Poe Profile; Upgrading Pse Processing Software In Service - HP 5500 EI Series Configuration Manual

through PoE profile), the latter configuration fails and the original one is still effective. To make the latter
configuration effective, you must cancel the original one first.
To configure a PoE profile:
Step
1. Enter system view.
2. Create a PoE profile, and
enter PoE profile view.
3. Enable PoE for the PoE
interface.
4. Configure the maximum
power for the PoE interface.
5. Configure power supply
priority for the PoE interface.

Applying a PoE profile

You can apply a PoE profile in either system view or interface view. If you perform application to a PoE
interface in both views, the latter application takes effect. To apply a PoE profile to multiple PoE interfaces,
the system view is more efficient.
A PoE profile can apply to multiple PoE interfaces, but a PoE interface can have only one PoE profile.
To apply a PoE profile to multiple interfaces in system view:
Step
1. Enter system view.
2. Apply a PoE profile to one or multiple PoE
interfaces.
To apply a PoE profile to an interface in interface view:
Step
1. Enter system view.
2. Enter PoE interface view.
3. Apply a PoE profile to the PoE interface.

Upgrading PSE processing software in service

You can upgrade the PSE processing software in service in either of the following two modes:
Command
system-view
poe-profile profile-name [ index ]
poe enable
poe max-power max-power
poe priority { critical | high | low }
Command
system-view
apply poe-profile { index index | name profile-name }
interface interface-range
Command
system-view
interface interface-type interface-number
apply poe-profile { index index | name profile-name }
172
Remarks
N/A
N/A
By default, this function is disabled.
Optional.
The default is 30000 milliwatts.
Optional.
By default, low is the power supply
priority for the PoE interface.