History Group Configuration Example - HP 5500 EI Series Configuration Manual

Configuration procedure
# Configure the RMON statistics group on the RMON agent to gather statistics for GigabitEthernet
1/0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon statistics 1 owner user1
# Display statistics collected by the RMON agent for GigabitEthernet 1/0/1.
<Sysname> display rmon statistics gigabitethernet 1/0/1
EtherStatsEntry 1 owned by user1-rmon is VALID.
Interface : GigabitEthernet1/0/1<ifIndex.3>
etherStatsOctets
etherStatsBroadcastPkts
etherStatsUndersizePkts
etherStatsFragments
etherStatsCRCAlignErrors : 0
etherStatsDropEvents (insufficient resources): 0
Packets received according to length:
64 : 235
256-511: 1
# On the configuration terminal, get the traffic statistics through SNMP. (Details not shown.)

History group configuration example

Network requirements
Configure the RMON history group on the RMON agent in
for GigabitEthernet 1/0/1 every one minute.
Figure 30 Network diagram
Configuration procedure
# Configure the RMON history group on the RMON agent to gather traffic statistics every one minute for
GigabitEthernet 1/0/1. Retain up to eight records for the interface in the history statistics table.
<Sysname> system-view
[Sysname] interface gigabitethernet 1/0/1
[Sysname-GigabitEthernet1/0/1] rmon history 1 buckets 8 interval 60 owner user1
: 21657 , etherStatsPkts
: 56 , etherStatsMulticastPkts : 34
: 0 , etherStatsOversizePkts
: 0 , etherStatsJabbers
, etherStatsCollisions
, 65-127 : 67
, 512-1023: 0
83
, 128-255 : 4
, 1024-1518: 0
Figure 30 to gather periodical traffic statistics
: 307
: 0
: 0
: 0