Nqa Configuration Task List - HP 5500 EI Series Configuration Manual

3. The NQA client computes the network performance and service quality parameters, such as the
packet loss rate and round-trip time based on the received responses.

NQA configuration task list

Task
Configuring the NQA server
To perform NQA tests successfully, perform the following configurations on the NQA client:
1. Enable the NQA client.
2. Create a test group and configure test parameters. The test parameters may vary with test types.
3. Configure a schedule for the NQA test group.
Complete these tasks to configure NQA client:
Task
Enabling the NQA client
Creating an NQA test group
Configuring an NQA test group
Configuring the collaboration function
Configuring threshold monitoring
Configuring the NQA statistics collection function
Configuring the history records saving function
Configuring optional parameters for an NQA test group
Configuring a schedule for an NQA test group
Remarks
Required for TCP, UDP echo, UDP jitter, and voice tests
Configuring ICMP echo tests
Configuring DHCP tests
Configuring DNS tests
Configuring FTP tests
Configuring HTTP tests
Configuring UDP jitter tests
Configuring SNMP tests
Configuring TCP tests
Configuring UDP echo tests
Configuring voice tests
Configuring DLSw tests
116
Remarks
Required.
Required.
Required.
Use any of the approaches.
Optional.
Optional.
Optional.
Optional.
Optional.
Required.