HP 5500 EI Series Configuration Manual page 227

a. Click the System Management tab.
b. Select CPE Authentication Users from the navigation tree to enter the CPE authentication user
configuration page.
Figure 66 CPE Authentication User page
c. Click Add to enter the page for adding a CPE authentication user.
Figure 67 Add CPE Authentication User page
d. Set the username, password, and description, and then click OK.
2. Add a device group and a device class (in this example, add DeviceA to the Device_A class of the
DB_1 group):
a. Click the Resource tab.
b. Select Group Management > Device Group from the navigation tree to enter the device group
page.
c. Click Add.
217