Traffic Mirroring Configuration Example - HP 5500 EI Series Configuration Manual

Task
Display user-defined QoS policy
configuration information.
For more information about the display traffic behavior and display qos policy commands, see ACL and
QoS Command Reference.

Traffic mirroring configuration example

Traffic mirroring configuration example
Network requirements
As shown in
Different departments of a company use IP addresses on different subnets. The marketing and
•
technology departments use the IP addresses on subnets 192.168.1.0/24 and 192.168.2.0/24
respectively. The working hour of the company is from 8:00 to 18:00 on weekdays.
Configure traffic mirroring so that the server can monitor the traffic that the technology department
•
sends to access the Internet, and IP traffic that the technology department sends to the marketing
department.
Figure 37 Network diagram
Configuration procedure
Monitor the traffic sent by the technology department to access the Internet:
1.
# Create ACL 3000 to allow packets from the technology department (on subnet
192.168.2.0/24) to access the Internet.
<DeviceA> system-view
Figure 37:
Command
display qos policy user-defined [ policy-name
[ classifier tcl-name ] ] [ | { begin | exclude |
include } regular-expression ]
109
Remarks
Available in any view