Configuring Snmpv1 Or Snmpv2C Basic Parameters - HP 5500 EI Series Configuration Manual

Step
5. Create or update a MIB view.
6. Configure an SNMPv3 group.
7. Convert a plaintext key to a
ciphertext (encrypted) key.
8. Add a user to the SNMPv3
group.
9. Configure the maximum
SNMP packet size (in bytes)
that the SNMP agent can
handle.
10. Configure the DSCP value for
SNMP responses.

Configuring SNMPv1 or SNMPv2c basic parameters

SNMPv1 and SNMPv2c settings are supported only in non-FIPS mode.
To configure SNMPv1 or SNMPv2c basic parameters:
Command
snmp-agent mib-view { excluded |
included } view-name oid-tree
[ mask mask-value ]
snmp-agent group v3 group-name
[ authentication | privacy ]
[ read-view read-view ]
[ write-view write-view ]
[ notify-view notify-view ] [ acl
acl-number | acl ipv6
ipv6-acl-number ] *
snmp-agent calculate-password
plain-password mode { 3desmd5 |
3dessha | md5 | sha }
{ local-engineid |
specified-engineid engineid }
snmp-agent usm-user v3
user-name group-name [ [ cipher ]
authentication-mode { md5 | sha }
auth-password [ privacy-mode
{ 3des | aes128 | des56 }
priv-password ] ] [ acl acl-number |
acl ipv6 ipv6-acl-number ] *
snmp-agent packet max-size
byte-count
snmp-agent packet response dscp
dscp-value
64
Remarks
Optional.
By default, the MIB view
ViewDefault is predefined and its
OID is 1.
Each view-name oid-tree pair
represents a view record. If you
specify the same record with
different MIB subtree masks
multiple times, the last
configuration takes effect. Except
the four subtrees in the default MIB
view, you can create up to 16
unique MIB view records.
By default, no SNMP group exists.
Optional.
The 3desmd5, 3dessha, and md5
keywords are supported only in
non-FIPS mode.
The md5, 3des, and des56
keywords are supported only in
non-FIPS mode.
Optional.
By default, the SNMP agent can
receive and send SNMP packets
up to 1500 bytes.
Optional.
By default, the DSCP value for
SNMP responses is 0.