Basic Function Group:f00-F50(0X0000-0X0032) - Powtran PI8600 F Series User Manual

S12 Excitation heft set value
Excitation heft actual
S13
value
S14 Torque heft Set value
S15 Torque heft actual value

5-2-3.Basic Function Group:F00-F50(0x0000-0x0032)

Code Description / LCD
F00 Control mode
Control mode choose, setting 0~2.
0 : V/ Fcontrol
It is not sensitive to motor parameters, can be used as power supply; for motor control, using
the combination of vector control and V / F control strategies, appropriately adjusts motor
parameters, obtain high-performance control effect; suitable for a inverter driving a motor
occasions; suitable for a inverter driving multiple motors occasions; suitable for the inverter
as a variable frequency power supplies.
1 : Sensorless vector control
High-performance speed sensorless vector control; need to set the appropriate electrical
parameters or the motor parameter tuning; truly achieved the decoupled AC motor, so that
operational control of DC motors.
2 : Sensor feedback close loop vector control
Suitable for high precision speed control occasions, need to install PG card and pulse
encoder shaft in the motor or mechanical equipment.
F01 Keyboard setting frequency Lower frequency~upper frequency
The keyboard for a given operating frequency,it can be any frequency between lower
frequency and upper frequency .
F02/F03setting to 0, Involved in setting frequency calculation.
F02 Frequency main set mode
Section V Parameter Function Table
Motor set excitation heft percentage
Motor actual excitation heft
percentage
Motor set torque percentage
Motor actual torque heft percentage
Setting Range
V/Fcontrol
Sensorless vector control
Sensor feedback close loop
vector control
Keyboard setting frequency
or RS485
AI1 the external analog
8000
setting
AI2 the external analog
setting
AI3 the external analog
8000
setting
Keyboard potentiometer
setting
53
% -
% -
% -
% -
Factory
Unit
Setting
0
1
- 0
2
Hz 50.00
0
1
2
- 0
3
4
N
N
N
N
Change
Limited
N
Y
Y