Powtran PI8600 F Series User Manual page 139

Commu-
Double RS485 port
nication
16-segment speed
8-segment running time
Speed
8 segment acceleration
speed
Seven-Segment Speed
Configuration
PID feedback signal
PID
PID giving signal
2 goups of motor parameters
3 identification method
Motor
5 name plate parameters
5 indentification
parameters
Environment temperature
Store temperature
Environment humidity
Environ-
Height· vibration
ment
Application location
Cooling method
Section VII Standard Specifications
type of failure time when failure occurrs, set frequency,
output frequency, output voltage, output current, running
state, running time, IGBT temperature.
Rs485 port and an optional keyboard completely isolated
RS485 communication module.
At most 16 segments can be set(use multi-functional
terminal to shift or program runs).
At most8segment running time can be set(multi-functional
terminal can be used to shift)
At most 8 acceleration speed(can use the multi-functional
terminal to switch).
At most 7 segment speed configuration can be set (multi-
functional terminal can be used to switch).
Six kinds of ways,keyboard,three way analog input,pulse
input, digital potentiometers.
Six kinds of ways,keyboard,three wayl analog input,pulse
input, digital potentiometers.
With the motor parameters, parameter can be selected,
parameter identification automatic storage.
Name plate calculation, static measurement, rotation
measurements.
Rated frequency, rated current, rated voltage, the number
of pole pairs, rated speed.
N-load current, stator resistance, rotor resistance, stator
inductance, mutual inductance.
-10℃ ~ 40℃, 40 ~ 50℃ derating between the use is
increased by 1 ℃, rated output current decrease of 1%.
-40℃~+70℃。
5~ 95 %, No condensation
0 ~ 2000 meters, 1000 meters above derating use,
increased by 100 m, rated input decreased%
Mounted vertically inside the control cabinet with good
ventilation, do not allow the level , or other installation
method . The cooling medium is air. Installed in the
absence of direct sunlight, N dust, N corrosive and
explosive gas, N oil mist, N steam, N drip environment
Forced air cooling and natural air cooling
137