Powtran PI8600 F Series User Manual page 118

Frequency inverters
Table of Contents

Advertisement

Section V Parameter Function Table
0 Cycle mode
Timing the operation time from the starting to the set watter supply time,the inverter will
automatically move to the next period of time set, after the end of a loop, it will
automatically re-start from the first paragraph 0, then cycle to run.
1 Single cycle
Start to time from start running, after it reached the setting time, the inverter will
automatically move to the next period of time set, after the end of a loop, the inverter will
stop and wait for the next running command.
1000 bit: The current regular time
When the water supply time set 0, it means cancel the water supply time setting of this period
Current time
0
1
2
3
4
5
6
7
E08
Timing shift alternation time 0.0~3200.0
Iming shift alternation time control the alternation ways and time of pump.
When Timing Shift Alternation Time is set to 0.0 hour and cancel Timing Shift Alternation
function.
When the Timing Shift Alternation Time between 0.1~3,200 , after corresponding time of
the stable running, in accordance with the principle of first stop for the one first started to control
switch of pump.
First stop for the first pump started: When reduce pumps control, stop the first pump which
started first.
According to the principle of start first–stop first control, in order to ensure that every pump
can have the chance to run to prevent some pumps rusted as a result of no use for long , such as
the need to ensure that each operation of the pump can receive equal time, set timing shift
alternation time.
Pump alternation order : E12 = 0x 0001
Starting State :
No. 1 pump frequency;
No. 2 pump frequency conversion;
No. 3 pump stops ;
Rotation :
No. 1 pump stops;
No. 2 pump frequency;
No. 3 pump frequency conversion ;
After the second rotation :
No.1pump frequency conversion;
No.2pump stops;
No.3pump power frequency.
Electromagnetic switch
E09
action delay
Water supply tim
Pressure given
H18
H19
H20
H21
H22
H23
H24
H25
0.000~10.000
116
H47
H48
H49
H50
H51
H52
H53
H54
H
s
0.0
Y
0.500
Y

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pi8600 g series

Table of Contents