Powtran PI8600 F Series User Manual page 137

7-2. Standard specification
Items
Voltage and frequency
Power
Allowable Fluctuation range voltage: ± 10%
Control system
Output frequency
control method
Start torque
speed adjustable range
Speed stabilizing precision
waveform produce methods
Auto torque boost function
Control
Accelerate / decelerate
control
Long running time control
frequency setting accuracy
frequency accuracy
V/F curve mode
Over load capability
slip compensation
Running method
Starting signal
Running Emergency stop
fault reset
Running status
Section VII Standard Specifications
Specifications
Single-phase 200~240V, 50/60Hz
frequency: ± 5%
high performance vector control inverter based on 32 bit
DSP
G/F type: 0.00~600.0Hz, maxmum frequency can be set
between 10.00 and 600.0Hz
V/Fcontrol control method
0.50Hz 180% Start torque
1：100 speed adjustable range
± 0.5% Speed stabilizing precision ± 0.5%
Asynchronous space vector PWM, N-class subsynchronous
space vector PWM, two-phase optimization of space vector
PWM.
Achieve low frequency (1Hz) and high output torque
control under V.F control mode.
Sub-set S curve acceleration and deceleration mode ,
maximum acceleration and deceleration time is 3200 days
16 segments speed run,maximum running time is 3200 days
Digit: 0.01Hz(below 300Hz), 0.1Hz(above 300Hz);
alalogue: 1% of maxmum frequency
Speed control tolerance 0.01%(25℃± 10℃).
Linear, 1.2 times the power, 1.7 times the power, 2 times
power, user-set 8 V / F Curve.
G type: 150% rated current -1 minute, rated current
200% -0.1 second;
F: rated current 120%-1 minute,150% of rated current-0.1
second;
V / F control can automatically compensate for
deterioration.
Keyboard/terminal/communication
Forward, reverse, jog (parameter control direction),forward
jog, and reverse jog.
Interrupt controller output.
When the protection function is active, you can automatically
or manually reset the fault condition.
Motor status display, stop, acceleration and deceleration,
135
V/Fcontrol
0.50Hz 180%
1：100