Powtran PI8600 F Series User Manual page 15

Example 2 Clear memory area 1, 2, 3, 4 in the keyboard
1. Under monitoring status, press
2. Through potentiometerSwitch to y00-23 System FG;
PRG
3. Press , enter into y00-23 System FG parameter group to check status;
4. Through potentiometerSwitch to y01 Upload To Keyboard;
PRG
5. Press , enter into y01 Upload To Keyboard parameter modify status;
6. Through potentiometer adjust to 5 ;
7. Finish the adjustment, press
cancle the change, press
ESC
8. Press to exit to previous menu.
adjust the value
Potentiometer of parameter
revisement
PRG
into parameter group to check status
SET
;the speed for Clear memory area will display on the LED;if
ESC
;
PRG
One Times
PRG
Two Times
SET
One Times
13
Section III Operation Keyboard
Potentiometer
PRG
Potentiometer
Clearance
Finished
One Times