Powtran PI8600 F Series User Manual page 12

Section III Operation Keyboard
3-2. Example for parameters set
3-2-1. F01 keyboard set the frequency from 50.00Hz to 25.00Hz.
1. Under monitoring status, press
2. Through potentiometerSwitch to F00-63 Basic FG;
PRG
3. Press , or ENTER, enter into F00-63 Basic FG parameter group to query status;
4. Through potentiometerSwitch to F01Fre. Set by K;
PRG
5. Press , or ENTER, enter into F01 Fre. Set by K parameter modify status;
PRG
6. Through , or ENTER, adjust the value is modified bit;
7. Through potentiometerHas been modified to adjust the bit values;
8. Finish the adjustment, press
ESC
9. Press to exit to previous menul .
adjust the value
Potentiometer of parameter
revisement
PRG
into parameter group to query status;
SET
;if cancle the change, press
PRG
One Times
PRG
SET
One Times
10
ESC
to escape to the modify status;
PRG
One Times
Functional
adjustment
Potentiometer
item
PRG
One Times