Io Function System：o00-O68(0X0200-0X0244) - Powtran PI8600 F Series User Manual

1 bit: Saving state of potentiometer after power down .
0: Saving after power down.
1: Clearing saving after power down.
10 bit: Keeping potentiometer set after stopping.
0: Keeping after stopping
1: To clear saving after stop command.
2: To cear saving at end of stopping.
Temperature adjustment of
A51
motor
Being used to revise displaying of A54 motor temperature.
Over-heat temperature of
A52
motor
A53 Reaction for motor over-heat
When the displaying value of motor temperature A5 surpassed value A52, inverter will warn
and react according to reaction for motor over-heat A53 set.
Display of motor
A54
8000
temperature
Shows the motor temperature or temperature at other point.
Control card PT100 plug should plug into the optional PT100 thermocouple devices
Three lines PT100
A55 Proportion of linkage ratio
In application of proportion of linkage, A55 setting is multiply ratio of that when slave
inverter received setting frequency command from host inverter.
Setting this inverter as one slave inverter of system for proportion of linkage.
Frequency Keyboard F01 set＝proportion of linkage ratio * frequency S00 set by host inverte
5-2-5.IO Function System：o00-o68(0x0200-0x0244)
Code Description / LCD
8000
o00 AI1 nput X1
1000bit Reserved
0.0~200.0
0.0~300.0
No reaction for motor
over-heat
Warning and runing
Warning and deceleration
stopping
Warning and free stopping
-50.0~300.0
0.10~10.00
Setting Range
-
81
Section V Parameter Function Table
℃
0
1
2
3
℃
Unit
% 100.0 N
120.0 N
Y
- 0
- N
- 1.00 Y
Factory Change
Setting Limited
- - -