Powtran PI8600 F Series User Manual page 76

Frequency inverters
Table of Contents

Advertisement

Section V Parameter Function Table
After 10 s of meeting fault, inverter will not recover fault reset function.
A26
Fault reset time
Setting interval of fault reset time. When inverter met fault and stopped outputting, and
when it inspected without fault time is longer than fault reset time, Inverter will automatically
implement fault reset.
A27
Fan startup temperature
Set the fan start temperature. When the actual temperature of theS08is higher than the set
temperature the fan starts.
To avoid the fan frequently starts and stops,the fan stop temperature=A27fan start temperature -
1.0 ℃
This inverter communication
A28
address
This Inverter communication address: it is the only code to differentiate from other inverters.
Setting range "1~127" is slave inverter address, that can receive command and send out this
inverter state. Seeing attachment 1 for detailed specification.
The proportion of linkage function:
The proportion of linkage host inverter:
This inverter communication address=128,
Communication interface A is set as host inverter communication interface for proportion of
linkage.
Communication interface B can be treated as keyboard interface or "PC" Host Computer
Interface.
The proportion of linkage slave inverter:
This inverter communication address =1~127,
Communication interface A and B both can be set as communication interface of slave
inverter for the proportion of linkage.
Seeing appendix 2 for detailed specification.
A29
Baud rate
This parameter only change the communication port A baud rate. Communication port B
baud rate is fixed at 19200bps.
A communication port using the onboard keypad (factory standard).
Onboard keyboard default 19200bps, do not change.
A communications port to use isolation RS485/Rs232 communication card (optional).
May need to change
A30
Communication format
0.5~20.0
8000
0.0~60.0
1~128
Baud rate is 1200
Baud rate is 2400
Baud rate is 4800
Baud rate is 9600
Baud rate is 19200
Baud rate is 38400
8 , N , 1 for RTU
8 , N , 2 for RTU
8,E,1 for RTU
8 , O , 1 for RTU
74
s
1.0
0.0
-
8
0
1
2
-
4
3
4
5
0
1
-
0
2
3
Y
Y
Y
Y
Y

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pi8600 g series

Table of Contents