Template Workflow - abi 7500 Getting Started Manual

Appendix A Alternate Experiment Workflows

Template Workflow

Template Workflow
Create a
Template
Create an
Experiment Using
a Template
Notes
208
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve
You can use a template to create a new experiment. Templates allow you to create many
experiments with the same setup information.
1. Double-click
(7500 software) or select Start All Programs
Applied Biosystems 7500 Software <software name>
where <software name> is the current version of the 7500 software.
2. Open an existing experiment, or create a new experiment.
You can create a new experiment using the Design Wizard (see Chapter 2 and
Note:
Chapter 6) or Advanced Setup (see page 204).
3. Select File Save As Template.
4. Enter a file name, select a location for the template, then click Save.
5. Click Close.
1. In the Home screen, click
If you do not see the Template icon, click the arrow below the Design Wizard
Note:
icon to expand the Set Up menu.
2. Locate, then select the template you created above, then click Open. A new
experiment is created using the following setup information from the template:
• Experiment properties
• Plate setup
• Run method
• Reaction setup
3. (Optional) If you want to modify the experiment, use Advanced Setup (see
page 204).
4. Click Save, enter a file name, then click Save to save the experiment.
Template.
and Comparative C Experiments
T