Start The Run - abi 7500 Getting Started Manual

Run Guidelines When you set up the 7500/7500 Fast system for automatic notification:
• Your system must be set up for network use. Refer to the Applied Biosystems 7500/7500
• Select the events for which you want to receive e-mail notifications. Select:
• Obtain e-mail addresses of those whom you want to be notified.
• Contact your systems administrator or information technology department if you

Start the Run

IMPORTANT!
experiments, perform maintenance, or allow the computer to run antivirus software or to
enter hibernation mode. Performing such activities while the instrument is running an
experiment will cause gaps in data collection.
To start your 7500/7500 Fast instrument:
1. In the 7500 software, click
2. Click START RUN
Notes
Applied Biosystems 7500/7500 Fast Real-Time PCR System Getting Started Guide for Relative Standard Curve
and Comparative C Experiments
T
Chapter 4 Run the Relative Standard Curve Experiment
Fast Real-Time PCR System Maintenance Guide.
– Instrument Error – To notify recipients by email of all errors encountered by
the instrument during each run.
– Run Started – To notify recipients by email when the instrument starts a run.
– Run Completed – To notify recipients by email when the instrument completes a
run.
Separate addresses with a comma (,).
IMPORTANT!
need:
– The e-mail addresses of users who will receive notifications
– A network address for a simple mail transfer protocol (SMTP) server on the local
area network (LAN)
– A user name and password for the server, if required for access
– The Secure Sockets Layer (SSL) setting of the server (on or off)
While the 7500/7500 Fast instrument is performing a run, do not create
.
Run in the navigation pane.

Start the Run

71