3D Face Photo; Before Exposure; Selecting Exposure Settings; Patient Positioning - Planmeca ProMax 3D Plus User Manual

3D FACE PHOTO

10 3D FACE PHOTO
ProFace sensor
10.1

Before exposure

10.2

Selecting exposure settings

10.3

Patient positioning

44 Planmeca ProMax 3D Plus & 3D Mid with ProTouch
If the X-ray unit has a ProFace sensor, you can take a 3D
photo of the patient's face.
NOTE If you wish to take an X-ray image and a 3D face photo
at the same time, refer to section 9.2.10 "Selecting 3D
face photo (X-ray units with ProFace sensor)" on page
32.
Proceed as described in section 9.1 "Preparing X-ray
system" on page 21.
NOTE You do not need to use the chin cup and adapter when
taking 3D face photos.
First select the ProFace program (3D Dental > ProFace).
Then accept the next screen.
Forward
1. Select the patient entry position as described in
section 9.4.1 "Selecting patient entry position" on page
34.
2. Guide the patient to the X-ray unit. The patient can sit
or stand during the exposure.
User's Manual (3D)