Planmeca ProMax 3D Plus User Manual page 36

3D PATIENT EXPOSURE
9.2.9 Selecting jaw side
Select jaw side
(right / left /
both sides)
9.2.10 Selecting 3D face photo (X-ray units with ProFace sensor)
32 Planmeca ProMax 3D Plus & 3D Mid with ProTouch
NOTE The available options depend on the selected program
ProFace sensor
Use the third button on the left of the screen to select the
jaw side that you wish to expose.
and image resolution.
If the X-ray unit has a ProFace sensor, you can take a 3D
photo of the patient's face at the same time as you take
an X-ray image. Select the last button on the left of the
screen to take both images at the same time.
Select 3D face photo
User's Manual (3D)