Planmeca ProMax 3D Plus User Manual page 56

3D MODEL EXPOSURE
Move C-arm up
52 Planmeca ProMax 3D Plus & 3D Mid with ProTouch
45 mm
Impression
on polystyrene disc
NOTE FOR PLASTER CASTS:
5. Place the model (impression or plaster cast) on the
polystyrene disc and ensure that:
• The model faces the sensor and
• The model is positioned so that the distance between
the cross formed by the volume center lights and the
front edge of the model is 45 mm.
Volume center
lights
Move the C-arm up about 13 mm (0.5 in.) by pressing
the image volume up button.
6. In the Planmeca Romexis program, click 3D > Model
Capture. Refer to the Planmeca Romexis User's
Manual for details on Romexis functions.
Sensor
User's Manual (3D)