Planmeca ProMax 3D Plus User Manual page 64

SETTINGS
12.1.5 Testing Routines (1500)
60 Planmeca ProMax 3D Plus & 3D Mid with ProTouch
• To take a test exposure:
1. Select User > 1500 Testing Routines > 1510 Test
Exposure.
2. Use the minus or plus buttons to set the exposure
values you wish to use.
3. Select the SET button.
4. Move to a protected area.
5. Press and hold down the exposure button for the
duration of the exposure. The C-arm will not move
when you take a test exposure.
6. Select the green check mark button.
User's Manual (3D)