Planmeca ProMax 3D Plus User Manual page 41

9.5.1 Moving image volume vertically (Z laser)
Move image volume up
Move image volume down
9.5.2 Moving image volume horizontally (X and Y lasers)
Volume center lights:
Front light
(X laser)
User's Manual (3D)
The volume bottom light (Z laser) indicates the position
where the lower edge of the image volume is.
Check that the image volume is positioned at the correct
height for your patient. If you need to move the image
volume up or down, press the image volume up or down
button. The volume bottom light (Z laser) will move
accordingly.
Down
Volume bottom light
The volume center lights cross in the middle of the image
volume. With the patient positioned in the unit, the volume
center lights form red lines on the front (front light) and on
the left side (side light) of your patient's head.
Image volume
Planmeca ProMax 3D Plus & 3D Mid with ProTouch 37
3D PATIENT EXPOSURE
Up
Image volume
Side light
(Y laser)