Planmeca ProMax 3D Plus User Manual page 60

SETTINGS
56 Planmeca ProMax 3D Plus & 3D Mid with ProTouch
• To set date display format:
1. Select User > 1200 Time and Date > 1210 Set System
Time and Time / Date Display Format > Date Display
Format.
2. Select the display format you wish to use.
3. Select the green check mark button.
• To set time:
1. Select User > 1200 Time and Date > 1210 Set System
Time and Time / Date Display Format > Change
System Time.
2. Use the plus and minus buttons to change the time.
3. Select the green check mark button.
NOTE The time is set to the local time at the factory. Change
the time setting to show the correct time before you
start using the X-ray unit.
User's Manual (3D)