Moving/Viewing The 3D Model; Rotating The Model; Changing The Model Size; Moving The Model - Planmeca Emerald User Manual

Moving/Viewing the 3D Model

Use the mouse to zoom in or out, move, and rotate the composite model.

Rotating the Model

1
Click and hold down the right mouse button.
The pointer changes to
2
Drag the mouse horizontally, vertically, or diagonally to rotate the image.
Drag in small increments for more control.
3 Release the mouse button to stop rotating. Repeat as needed.

Changing the Model Size

Use the scroll wheel on the mouse to zoom in and out on the model.
1
Position the pointer on your model.
2
Rotate the mouse wheel downward, toward your wrist.
The pointer changes to
3
Rotate the mouse wheel upward, away from your wrist.
The model becomes larger.

Moving the Model

The model can be moved without being rotated.
1
Position the pointer on the model.
2 Press and hold down the mouse wheel.
The pointer changes to
3
Drag the model to the desired position and release the mouse wheel.

System Options and Default Settings

Individual tabs are used to design the restoration: Setup, Scan, Margin, Design, and Mill. The tabs are dynamic. The
choices you make on each tab affect the options available on that and related tabs. The typical restoration utilizes
the tabs from left to right. Moving backwards in the process (e.g., modifying the settings in the Margin tab after
completing the design in the Design tab) can cause settings and designs to be discarded. The system warns you
when your actions will cause design data to be discarded.
Some system configurations will restrict the use and access of individual tabs.

Screenshots

You can save an image of the screen for communicating with associates or Customer Support.
+ Prt Sc keys simultaneously.
Press
15698200.B
.
and the model becomes smaller.
.
Introduction 11