4.3 Additional preparations on 3D X-ray units
Non-rotating tube head
-> remove 3D sensor from C-arm
(refer to section 4.2.1)
4.4 Preparing Planmeca Romexis
User's Manual
If your X-ray unit has a non-rotating tube head, you must
remove the 3D sensor from the C-arm before you can
take cephalometric exposures.
3D unit
C-arm
No joint
(tube head does
not rotate)
First select the patient.
Then select the cephalometric exposure.
Refer to the Planmeca Romexis User's Manual for details
on Romexis functions.
4 PREPARATIONS FOR EXPOSURE
Rotating tube head
-> no need to remove 3D sensor
Planmeca ProMax Cephalostat
Joint
(tube head rotates
to ceph position)
11