Typical Values For Terminal Status Parameters; Table 16: Terminal Status Parameters - Typical Values And Range - Hughes HN9500 Installation Manual

System Control Center

Typical values for Terminal Status parameters

Parameter
LAN Interface Status
Dial Backup Status
TCP Acceleration Status
Turbo Page Status
SSL Acceleration Status
DNS Acceleration Status
Note: The Terminal Status page also displays numerous statistics that are not listed in this table. These
statistics are displayed by category, beginning with the Transport Interface Receive Statistics category.
For all of the statistics not included in this table, the typical value is any whole number greater than zero.
The following table lists typical values and the range of values for parameters on the Terminal
Status page. This information may help you understand the values displayed by a customer's
satellite router.
To see the definition of any parameter, click the parameter name on the screen.
The Dial Backup Status parameter and Dial Backup Status category of parameters apply to the
optional VADB feature, which is set up and enabled on your satellite router only if you or your
organization ordered it.
Table 16: Terminal Status parameters – typical values and range
Typical values
Overall Status (parameter category)
Up Up
Down
Out of Service
Maintenance
Unknown
Disabled Disabled
Connected
Connecting: ...
Disconnecting: ...
Disconnected: ...
Enabled Enabled
Disabled
Enabled Enabled
Disabled
Disabled Disabled
Connected to Server
Connecting to Server
Disconnected from Server
Enabled Enabled
Disabled
HN9500 Satellite Router Installation Guide
Chapter 9
Range of values
1037736-0001 Revision G
83