Table of Contents
Advertisement
Chapter 2
Power supply information
Power supply type and
part number
AC/DC, 111 W
P/N 1501087-0001
HN9500 Satellite Router Installation Guide
12
1037736-0001 Revision G
Also see and adhere to the customer-specific installation specification. Typically these
specifications apply to all installations for a particular company.
The power supply is included in the satellite router shipping carton.
Figure 7: Power supply for the HN9500 satellite router
Before proceeding, make sure you have the correct power supply. Check the part number on the
power supply and refer to
• Always use the power supply provided with the satellite router. The router's performance
may suffer if the wrong power supply is used.
• Connect the power supply to a three-wire, grounded outlet with an input of 110/130 VAC.
A suitable surge protector is recommended to protect the satellite router from possible
damage due to power surges.
• If the satellite router is installed outside the United States or Canada, observe the power
standards and requirements of the country where it is installed.
Table 3: Power supply specifications for the HN9500 satellite router
Application
HN9500 satellite router
with 1 W, 2 W, or 4 W
radio or 10 W power
booster unit
Figure 7: Power supply for the HN9500 satellite router
Electrical requirements
Input line voltage:
100 – 130 V, 2 A maximum
Input line frequency:
60 Hz AC
Rated power consumption: 111
W
Preparing for installation
on page 12.
Power cord
Detachable, for 110
VAC outlet type.
Advertisement
Table of Contents
Troubleshooting
