System Control Center
Red flag indicator
System Status page
For a list and explanation of all state codes, see
On the status and information screens, a red flag next to a value indicates a problem related to
the parameter listed in the same row where the flagged value appears. The flagged value appears
in the right column; the parameter appears in the middle column. The value indicates the current
state of the parameter.
Figure 47: Red flag problem indicator
The red flag may help you identify and troubleshoot a problem. If you see a red flag, click the
parameter name. The pop-up window that appears may include troubleshooting information.
For detailed troubleshooting information concerning red flag indicators, see:
•
Red flags on System Status page
•
Red flags on Reception Information page
•
Red flags on Transmission Information page
In these three sections you can find the probable cause and possible solution for a red flag next
to a specific parameter.
The System Status page displays important information about the satellite router's operational
status.
Available system status values may vary, depending on how the satellite router is configured.
Therefore, some options shown in
on your System Status screen.
Table 18: State codes
on page 76
on page 79
on page 81
Figure 48: System Status page
HN9500 Satellite Router Installation Guide
1037736-0001 Revision G
Chapter 9
on page 88.
on page 74 may not appear
73