Entering Commissioning Parameters - Hughes HX90 Installation Manual

Entering commissioning parameters

Chapter 4 • Commissioning the satellite router
34
1039456-0001 Revision A
Figure 13: Confirming the sbc.cfg file upload
• After the upload completes, click
to return to the Satellite Setup menu.
To commission the satellite router you enter parameters for the antenna location,
satellite, and radio. In some circumstances you may have to enter the antenna
location and/or satellite parameters manually, as explained in the sections that
follow.
Entering the antenna location
Begin commissioning by entering the antenna location:
1. Open a browser on the installer laptop.
2. Type
http://192.168.0.1/fs/registration/setup.html
address bar.
Enter
3. Press .
The Satellite Setup menu appears.
Close
on the Configuration File Upload screen
in the