Chapter 2: Preparing For Installation - Hughes HN9500 Installation Manual

Chapter
2
Preparing for installation
Topics:
Installation summary
Installation checklist
Conducting a site survey
Instructions for other terminal
components
Power supply information
Primary tools and equipment
needed for installation
Additional equipment
Computer requirements
This section describes preparations for installing the satellite router and includes
information you should know before you begin. Review this information before
you install the satellite router, antenna assembly, antenna mount, or IFL cables.
Refer also to Installation summary
To install the satellite router, you need the Installation Reference Sheet. This
form includes parameters you need to enter to install the router (A code, B code,
C code, and U code, which are explained later). Print the Installation Reference
Sheet for your specific installation from the online HughesNet Installation Portal.
Before you proceed, review the sections in this chapter, which are listed in the
left panel.
HN9500 Satellite Router Installation Guide
on page 8.
1037736-0001 Revision G
7